DRILL TOOL
Button Bit
Drill Rod
Shank Adapter
Coupling Sleeve
Blade Bit
Coal Mining Drill Bit
Reaming Tool
Retrac Button Bit
Rotary Drill Bit
Cemented Carbide Grinding
Integral Steel Grinding
DTH TOOL
DTH Bit
DTH Hammer
DTH Pipe
Jumbo Cluster Hammer
Low Air Pressure DTH
Anchor Tools
Sub Adaptor
DTH Bit Profile
Special DTH Bit
RC Tools
Overburden System
ROCK DRILL
Pneumatic Rock Drill
Hydraulic Rock Drill
Excavator Mounted
Paving Breaker
Air Pick
STONE TOOL
Block Splitting
Block Pushing
Integral Steel Grinding
Polishing and Grinding
Abrasive Consumable
Diamond Blade and Drill

Button Bit Grinder

This high powered grinding head, primarily designed to be used in the powerful hand held pneumatic button bit grinder, is configured for hand-held use by ergonomic placement of a very efficient throttle and support handle. Simplicity in design combined with the latest manufacturing techniques gives the operator a powerful tool for the most demanding job.leading the technological evolution of button bit grinding equipment is our aim. Air hand-held Button bit grinder machine (CME button bit grinder,pneumatic button bit grinder) Grinding machine for button bits, grinding pins, Hexagon grinding cup for drill bit, grinding carbide, button bit, DTH bit, tungsten carbide, air flush, water flush, button bit grinder is used for grinding carbide on button bits such as DTH-button bits, and top hammer percussive bits.

Button Bit Grinder

Designed for air or water flush (can be changed withour modification)
Only 2,55kg
Quick chuck: no tools needed to change the grinding pins, grinding cup.
Adjustable support handle
Silenced
Low air consumption 0.90 m3 m-1

Pneumatic Hand Held Button Bit Grinder Machine G200

 
 
G200 handheld grinding machines have quickly established themselves as dependable and versatile machines, credited by the professionals and CE approved. The rotating speed of G200 is 22000RPM which make the drill could finish the grinding of a drill bit with diameter 6-10mm in 5-8seconds,and only 20 seconds for a 20mm diameter bit,
The Air Grinders require a clean and dry air supply of a minimum 60 psi and 29 cfm passing through an in-line oiler to supply lubrication to the grinder. Also, a supply of water from a mains supply or a sump is required to act as a coolant during the grinding process. A full spares back-up service is also available. Available with a choice of Hemispherical, Ballistic Semi Ballistic, Paraboloid or Conical pins, in sizes 6mm to 25mm, a full spares back-up service is also available.
 
.